The U bolt is attached to the case as shown above. The lock nut is bolted in from under the case. Repeat the same procedure for the front of the case and you're nearly ready to attach the strap.
Before LAN 825 can come back together, Mudzy had to file down the bolts on the back of the case to clear the power supply. The front had no clearance problems.
Ready to Quake!
With the LAN Strap® system all done, we put LAN 825 back together, detailed all the wires, hooked up the LAN Strap® and we're ready to Quake! See you at The Tech Zone LAN parties!