Not only are the hard drive mounts quick release with the 292-3333 but so are all your other drives. Quick release rails are supplied for your floppy and three 5.25" drives. This is a real time saver. You just slide the rails in and it locks in place. With the 292-3333, you can slide them in like normal or at 90 degree to get a desktop system.

For all you tweakers out there, this is by far the best part of the 292-3333. With its innovative PCI clamping system, the 292-3333 allows you to install your AGP video card and any PCI or ISA devices without screwing it down. The devices are held in place by a quick release clamp! Need to change video card real quick? Release the clamp, change the video card, clamp it back in place and you're done! No screw driver needed! 

Here you can see the case with and without a system installed. The motherboard tray can not be removed but that doesn't slow down the installation of the system. There is plenty of room inside the case to accommodate all motherboards on the market. Notice that the front intake fan is angle up to blow at the CPU and video card.

Next page: How does it perform?

[Page 1] [Page 2] [Page 3] [Page 4] [Home]