BAYCOOLER-2 by inClose
The Ultimate Hard Drive Cooling Kit!

Installation:

The installation is pretty straightforward...  That's pretty much what I had expected Everything from the front grill right on back to the hard drive mounting chassis is already assembled in the box.  The only thing you're required to do is mount your hard drive, install it in your drive bay, and connect the hard drive, power supply, and LED connectors.    Here's a detailed diagram showing all the parts:

Okay, it looks fairly simple in the diagram.  But, how easy was the installation?  Here's the step-by-step process of my installation experience with the BayCooler II:

	The Components BayCooler II and IBM DJNA 13.5gig hard disk.
	Step 1 Line up your hard drive with BayCooler II assembly.
	Step 2 Mount the BayCooler II to the hard drive.
	Step 3 Plug the male end of the Y-power cable from BayCooler II into the hard drive's power inlet.
	Step 4 Insert the BayCooler II/ hard drive assembly into 5 1/4" drive bay after removing panels from your computer case.
	Step 5 Using the screws provided, fasten hard drive and BayCooler II unit on both sides.
	Step 6 Plug available male power connector from power supply into the BayCooler II Y-power cable and reassemble your case.
	Step 7 ENJOY!  You've now got a sexy and efficient hard drive cooler!

Very, very easy!  This was much more simple than I thought it would be.  Total installation time about 35 minutes.  Okay, we know it's easy to install, but how good does it work?

Next page: Performance

[Page 1] [Page 2] [Page 3] [Home]