The Tech Zone Soyo SY-6BA+IV Motherboard Review

SY-6BA+ IV Click for bigger image
	Supports up to 30 selectable sets of system and PCI clock speeds inside the BIOS directly, allowing for easy, no-jumper configuration!
	Adjustable CPU Voltage- provides five level selections up to 10% voltage buffer, allowing directly set through BIOS without any jumper!
	SOYO AI-BIOS : Four-Way Active Intercepted CIH virus Design
	Independent 3.3V for DIMM, allowing for enhancing system reliability and compatibility
	Innovative Sofset for CPU FSB, multiplier, PCI bus frequency, AGP bus frequency configuration without extra jumper setting!
	Supports on-board Hardware Monitoring and includes Hardware Doctor Utility to streamline your PC system management
	Supports WOL (Wake On LAN) function to simplify network management
	Provides SOYO COMBO setup- an user friendly, mighty features setup on BIOS for professional users
	Advanced Management Capabilities * Software power off control, Power-on by keyboard, Power-on by Alarm, Modem Ring On
	Power Failure Resume Function
	5VSB indicator on board provides users real time power status information
	IDE/FDD Cable with latch, provide a reliable quality for cable connecting
	Super Performance Slot 1 Platform- Designed for Super power PC enthusiast!!

	Model
SY-6BA+ IV
	Description
-	66/100MHz FSB Slot 1 Based Intel 440BX ATX Motherboard
	Processor
Supports the following processors
-	100MHz FSB Pentium III Processors 450/500/550/600 MHz
-	100MHz FSB Pentium II 350/400/450 MHz
-	66MHz FSB Pentium II 233/266/300/333 MHz
-	66MHz FSB Celeron Processors 266~300MHz
-	66MHz FSB Celeron Processors 300A~433 MHz with integrated 128KB full speed L2 cache
	Chipset
-	Intel 440BX Chipset
-	66/100MHz CPU FSB
	System Memory
-	Four 168-pin SDRAM DIMM sockets support up to 1GB
-	PC100 DIMM support
-	Provides ECC (Error Checking Correction) capability
	Expansion Slots
-	Five 32-bit Bus Mastering PCI slots (V2.1 compliant)
-	Two 16-bit ISA slots (one shared ISA/PCI slot)
-	One AGP slot (v1.0 compliant)
	On Board Ultra I/O Chip
-	ITE 8671F-A chip
-	Two RS-232 serial ports (16550 UART compatible)
-	One parallel printer port (SPP/EPP/ECP mode)
-	One FDD port (Supports LS120, 3 mode, 1.2/1.44/2.88 MB FDD
-	Provides IrDA port with optional cable for transceiver
	Ultra DMA 33 & 66 IDE ports
-	Four independent channels for up to Eight IDE devices
-	Two channels support up to PIO mode 4 & UDMA 33
-	Two channels support up to ATA-66
-	Four PCI bus mastering ATA E-IDE ports
	Boot-Block Flash BIOS
-	Award PCI BIOS with green, ACPI, APM, PnP, DMI, functions and Year 2000 compliant
-	Supports multiple-boot from E-IDE/SCSI/CD-ROM/FDD LS120/ZIP
-	2 Mbit Flash ROM
	Board Dimensions
-	Four layers, 30.5 cm x 19 cm (12” x 7.5”)
-	ATX form factor
	Enhanced PC Health Monitoring
-	On-board voltage monitors for CPU Vcore, VTT, +5v, +12V, 3.3V, 5VSB and battery low
-	CPU fan four speed control and monitor
-	FAN speed monitor
-	Precision CPU temperature monitoring through CPU on-die thermal diode
	Double stack Back-Panel I/O Connectors
-	PS/2 Mini-DIN mouse & keyboard ports
-	Two USB ports
-	Two D-Sub 9-pin male serial ports
-	One D-Sub 25-pin female printer port
	FCC Class B and CE EMI Regulation Compliant
	PC98 ACPI Compliant

Next Page: Installation

[Page 1] [Page 2] [Page 3] [Page 4] [Home]