ENERMAX ULTRA COOL EG451P-VE 450w Power Supply
Specifications
This was a difficult section for me to write. "Where do I start?" " What info should I include?" "What is too much?" "How can I write this review so it doesn't sound the same as my last power supply review?" These were all questions swimming in my head as I embarked on this journey. The inner turmoil was almost unbearable. I think I have a handle on it now. You can assume that this power supply has the same raw power and basic features as just about any other power supply in its class. But, if you take a close look at some of the additional safeguards and tight tolerances Enermax uses for their power supplies you'll find that this is truly a gem. These power supplies are some of the best constructed power supplies on the market right now. They are extremely well made with only the highest quality components which will provide your computer with clean and consistent power. I'm going to share some of the specs that should be the very basic criteria for selecting a power supply. But, for those of you who are more technical minded and have a passion for details I've included the spec sheets that Enermax provided here. Here's some basic specs for you to ponder:
|
|
Enermax
EG451P-V 450w Power Supply |
|||
|
AC INPUT |
90V-132VAC: 180V-264VAC |
|||
|
Power
Distribution |
Min |
Max |
Peak |
|
|
DC OUTPUT (AMPS) |
+3.3V |
0A |
35A |
40A |
|
+5VDC |
11A |
44A |
- |
|
|
+12VDC |
3.75A |
15A |
18A |
|
|
-5V |
0A |
2A |
- |
|
|
-12VDC |
0A |
1A |
- |
|
|
+5Vsb |
0A |
1.8A |
- |
|
|
REGULATION |
+3.3V |
± 4% |
||
|
+5V |
± 5% |
|||
|
+12V |
± 5% |
|||
|
-5V |
± 10% |
|||
|
-12V |
± 10% |
|||
|
+5Vsb |
± 5% |
|||
|
RIPPLE & NOISE |
+3.3V |
40mv |
||
|
+5V |
50mv |
|||
|
+12V |
120mv |
|||
|
-5V |
50mv |
|||
|
-12V |
120mv |
|||
|
+5Vsb |
50mv |
|||
|
POWER GOOD
SIGNAL |
Turn on delay
time 150-450ms |
|||
|
EFFICIENCY |
72% typical
at full load |
|||
|
OVER LOAD
PROTECTION |
105% - 150%
of max load |
|||
|
OVER VOLTAGE
PROTECTION |
+5V:
5.6V-6.9V +3.3V: 3.6V –
4.6V |
|||
|
HOLD UP TIME |
16ms min at
120VAC full load |
|||
|
OPERATING
TEMP |
0-40° C for
max load |
|||
|
HI-POT |
1500VAC, 1
minute (or 1800VAC, 1 sec) |
|||
|
HUMIDITY |
10% - 90%
Non-condensed |
|||
|
SUPER NOISE
KILLER |
STANDARD |
|||